Mr.Fukatsu(M1) and Mr.Minamide(B4) gave presentations on the following topics at the 2nd International Symposium on Green Electronics. M1 Fukatsu“Stiffness evaluation of self-folded corrugated structures fabricated by ink-jet printing and mounting compression sensors” B4 Minamide“Paper-based self-folded…
At the 23rd Society of Instrument and Control Engineers Symposium on System Integration (SI2022), M2 student, Mr. Kawagishi, was awarded the SI2022 Excellent Presentation Award. M2 Kawagishi“Proposal of Origami Trigger Mechanism for Autonomous Structure Formation…
Mr. Kawagishi(M2) and Mr. Hojo(M1) gave presentations on the following topics at the 23rd Session of the System Integration Division of the Society of Instrument and Control Engineers (SI2022). Mr. Hojo(M1)“Design Study of Object Shape…
Mr. Matsumoto (M1) gave a presentation on the following topic at Multiphysics Conference. Mr. Matsumoto (M1)“Parametric Analysis to Investigate Design Parameters of Magnetohydrodynamic Propulsors”
Mr. Fukatsu(M1) gave a presentation on the following topic at the 33rd 2022 International Symposium on Micro-NanoMechatronics and Human Science. Mr. Fukatsu(M1)“Stiffness investigation depending on wavenumber of Self-folded Corrugated Structure by analytical solution”
Mr. Matsumoto (M1) gave a presentation on the following topic at 2022 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2022). Mr. Matsumoto (M1)“Soft-Skin Actuator Capable of Seawater Propulsion Based on MagnetoHydroDynamics”
Mr. Maeda (B4) has co-authored the following paper at International Conference on Organic and Hybrid Thermoelectrics. Mr. Maeda(B4)“Developing of a Printed Thin-Film Thermoelectric Device on a Paper Substrate”
Mr. Okamoto (B4) and Ms. Naritomi (M1) gave presentations on the following topics at the Global Conference on Consumer Electronics. Mr. Okamoto (B4)“Development of lightweight soft gripper for quadcopter-based grasping operations”. Mr. Naritomi (M1)“Paper cushioning…
M1 Daichi Narutomi’s research on autonomously folding honeycomb structures was accepted by Materials & Design. Creation of origami-inspired honeycomb structure using self-folding paper – Materials & Designhttps://doi.org/10.1016/j.matdes.2022.111146
The following topic was presented at the Robotics and Mechatronics Lecture Meeting 2022. M1 Naritomi, “Evaluation of the Resilience of Self-Folding Origami Honeycomb Structure” M1 Fukatsu, “Investigation of the Effect of Thickness and Thinness on…
